{"product_id":"era-silencer-silencer-sob2s-7-62-8-mm-caliber-30-7-62mm-5-8-24-unef-673039","title":"ERA SILENCER Silencer SOB2S 7.62 - 8 mm (Caliber .30 \/ 7.62mm – 5\/8\"-24 UNEF)","description":"\u003cp\u003e\u003cstrong\u003eERA® SILENCER SOB2S – the resilient one, also suitable for the shooting cinema.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e The ERA® SILENCER was developed with the aim of achieving the best possible damping with a compact design and the lowest possible weight - and this with full Magnum suitability and a long service life.\u003c\/p\u003e\u003cp\u003e The most important requirement for a silencer in hunting use is the most effective possible damping of the muzzle blast to protect the hearing of humans and dogs.\u003cbr\u003e\u003cbr\u003e The silencers of the SOB series are designed as telescopic silencers (over-barrel). A part of the damper protrudes backwards over the barrel and very good damping values can be achieved with a small net overall length. In addition, the first shot bang that is usual with other silencers is reduced to an absolute minimum. Recoil and muzzle flash are also significantly reduced.\u003c\/p\u003e\u003cp\u003e The ERA® SILENCER is easy to disassemble: the threaded bushings are interchangeable. By exchanging the threaded bushing, the ERA® SILENCER can also be used on other weapons of the same caliber but with different barrel threads. Also included is a protective shield that mounts to the rear end of the over-barrel shock. It protects the barrel thread and the damper from damage from lateral forces and prevents dirt and snow from penetrating. The surface structure ensures significantly less adhesion of powder residues inside the damper. Longitudinal grooves milled on the outside provide the necessary grip during assembly and ensure faster cooling. The stepped design protects the sealing rings, since there is no contact with the powder residues in the outer tube during disassembly. A coating according to MIL-SPEC MIL-A-8625F Type III meets the highest requirements for hardness and corrosion resistance. The ERA® SILENCER offers numerous advantages and is excellently equipped to survive in everyday use when hunting.\u003c\/p\u003e\u003cp\u003e \u003cu\u003e\u003cstrong\u003e10 arguments for the ERA® SILENCER\u003c\/strong\u003e\u003c\/u\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003e \u003cstrong\u003eSuitable for shooting cinemas -\u003c\/strong\u003e heavy-duty panel made of stainless steel\u003c\/li\u003e\n\u003cli\u003e \u003cstrong\u003ehigh attenuation performance –\u003c\/strong\u003e SOB2S up to 31 dB\u003c\/li\u003e\n\u003cli\u003e \u003cstrong\u003e\"First-round-pop\" minimized -\u003c\/strong\u003e the ERA® SILENCER reduces the \"first-round-pop\" effect to a minimum thanks to its specially designed panel\u003c\/li\u003e\n\u003cli\u003e \u003cstrong\u003elow net length due to telescopic design -\u003c\/strong\u003e SOB2S net length 105 mm\u003c\/li\u003e\n\u003cli\u003e \u003cstrong\u003elight weight -\u003c\/strong\u003e SOB2S 520g\u003c\/li\u003e\n\u003cli\u003e \u003cstrong\u003eReduced recoil -\u003c\/strong\u003e due to the particularly large number of baffles, recoil is significantly reduced\u003c\/li\u003e\n\u003cli\u003e \u003cstrong\u003elow muzzle flash -\u003c\/strong\u003e the muzzle flash is almost completely deflected into the interior of the damper, thus significantly reducing the blinding effect on the shooter\u003c\/li\u003e\n\u003cli\u003e \u003cstrong\u003eInterchangeable threaded bushing -\u003c\/strong\u003e thanks to the interchangeable threaded bushing, the ERA® SILENCER can easily be used on other weapons of the same caliber with different barrel threads\u003c\/li\u003e\n\u003cli\u003e \u003cstrong\u003eStep geometry: Less wear and tear on the sealing rings -\u003c\/strong\u003e the step-shaped design prevents damage to the sealing rings, since any contact with the powder residues in the outer tube is avoided when disassembling\u003c\/li\u003e\n\u003cli\u003e \u003cstrong\u003eSurface coating according to MIL-SPEC -\u003c\/strong\u003e meets the highest requirements for hardness and corrosion resistance\u003c\/li\u003e\n\u003cli\u003e \u003cstrong\u003eSuitable for magnums -\u003c\/strong\u003e high-strength aluminum alloys and solid wall thicknesses allow use even with magnum calibres\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003e ERA®LOC version\u003c\/h3\u003e\u003cp\u003e The silencer is also optionally available with the ERA®LOC quick release fastener. When ordering the ERA®LOC version, you also need the appropriate ERA®LOC barrel thread bush.\u003cbr\u003e The ERA®LOC quick-release fastener allows the silencer to be attached and removed quickly and easily with just a short 60° turn. The very robust thread ensures that the silencer is held securely thanks to the large number of threads. The ERA®LOC thread itself is protected from powder residue by the contact on the front side and guarantees consistent and safe functioning.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAttenuation value: approx. 31 dB \u003c\/li\u003e\n\u003cli\u003e Total length: 235 mm \u003c\/li\u003e\n\u003cli\u003e Extended by approx. 105 mm \u003c\/li\u003e\n\u003cli\u003e Barrel protrusion: 130 mm \u003c\/li\u003e\n\u003cli\u003e Muffler Ø: 51 mm \u003c\/li\u003e\n\u003cli\u003e Barrel Ø: max. 22.5 mm \u003c\/li\u003e\n\u003cli\u003e Weight: 520 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ERA SILENCER","offers":[{"title":"Default Title","offer_id":52928090112266,"sku":"673039","price":589.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0936\/9937\/5370\/files\/server_7638e221-d5b7-40c6-b103-618203b1a958.jpg?v=1777022787","url":"https:\/\/shop.gunrange.lv\/products\/era-silencer-silencer-sob2s-7-62-8-mm-caliber-30-7-62mm-5-8-24-unef-673039","provider":"GUNRANGE","version":"1.0","type":"link"}